Corrugators

Corma’s unique vertical construction corrugator design can be traced all the way back to our very first corrugator – the M600 designed and built over 50 years ago. It was the first corrugator in the world with independent carriers that aligned the mold blocks top to bottom. Since then, it has become a defining feature of a Corma corrugated plastic pipe extrusion line and it has provided many advantages for our customers over the years. Our current lineup of high output 30 and 40 Series Corrugators have earned a proven track record around the world. We look to continue the tradition of excellence with the introduction of the New 40 Series Corrugators. Building upon the success of its predecessors, the 40 Series lineup will feature an extended pipe forming section and higher cooling capacity to offer even higher output rates than previously possible.

Model 054

Model Spec Sheet

Data

Dimensions

Following the success of the 053 Series, the new versatile Model 054 Future Generation Corrugator has double the pipe range without increasing the footprint. Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components.

Model 130

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 130 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components.

Model 430

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 430 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components.

Model 630

Model Spec Sheet

Data

Dimensions

Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components. The 630 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall.

Model 830

Model Spec Sheet

Data

Dimensions

The 830 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains

Model 840

Model Spec Sheet

Data

Dimensions

The 840 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains

Model 1030

Model Spec Sheet

Data

Dimensions

The 1030 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains

Model 1230

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 1230 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe and Ultra Rib production systems as complete turnkey installations or as individual components.

Model 1530

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 1530 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe and Ultra Rib production systems as complete turnkey installations or as individual components. The 1530 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall.

Model 2430

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 2430 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe and Ultra Rib production systems as complete turnkey installations or as individual components. The 2430 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall.

Model 3630

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 3630 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe and Ultra Rib production systems as complete turnkey installations or as individual components. The 3630 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall.

Model 4830

Model Spec Sheet

Data

Dimensions

The 4830 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains

Model 6030

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 6030 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe and Ultra Rib production systems as complete turnkey installations or as individual components. The 6030 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall.