Corrugators

Plastic corrugated pipes and tubes are an ideal solution for electrical conduit and cable ducting and can be found within the walls of buildings as well as underneath the ground below roads and walkways.

Corrugated electrical and cable ducting protects critical infrastructure from being damaged, including electricity, telecommunications, lighting and many other utilities. Commonly used materials include polyethylene (PE), polypropylene (PP) as well as PVC (polyvinyl chloride).

Some of the advantages of plastic corrugated pipes for cable protection include:

  • Produced in continuous length, minimizing the number of required joints
  • Coilable, easy to transport
  • Flexibility allows installers to easily lay pipes around obstacles
  • Smooth inner layer minimizes friction and enables easy cable pull in
  • Outer corrugated layer provides strength while minimizing weight for ease of transport and installation

With extensive experience in pipe and profile design, Corma corrugators are capable of producing a wide variety of corrugated electrical conduit and cable protection solutions:

  • Single, double or triple wall pipes
  • Traditional corrugation profile or spiral pipe
  • Large range of pipe sizes
  • Round or oval corrugated pipe profile

Model 130

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 130 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components.

Model 430

Model Spec Sheet

Data

Dimensions

Some of the advantages of Corma Corrugators that have made the Model 430 series a best seller, the world over: Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components.

Model 630

Model Spec Sheet

Data

Dimensions

Corma offers standard systems capable of producing pipes of virtually all sizes, from extremely small pipes with inside diameter measuring as little as 1 mm (0.040 in.) to enormous pipes with outside diameters measuring as much as 3000 mm (120 in.). Corma supplies Single Wall, Double Wall, Triple Wall, Rib Pipe, and Ultra Rib production systems as complete turnkey installations or as individual components. The 630 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall.

Model 830

Model Spec Sheet

Data

Dimensions

The 830 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains

Model 840

Model Spec Sheet

Data

Dimensions

The 840 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains

Model 1030

Model Spec Sheet

Data

Dimensions

The 1030 corrugator uses Corma’s vacuum forming technology and accepts vacuum formable materials including PVC, PE, and PP. This model produces single wall corrugated pipe, double wall pipe with corrugated outer walls and smooth inner walls and triple wall pipe, produced as a corrugated middle layer between a smooth inner and outer wall. These systems are available for a wide range of applications:

• Underground service ducts
• Industrial waste pipes
• Cooling/ventilation ducts
• Leachbed drainage pipes
• Transporting aggressive fluids
• Sanitary drains
• Highway drainage pipes
• Electrical cable conduits
• Land drainage pipes
• Landfill gas extraction
• Stormwater drains